Today, the Danish Working Environment Service is the supreme authority for pressure equipment in Denmark. All pressure equipment that holds or may develop pressures above 0.5 bar overpressure and portable pressure equipment are subject to special requirements for construction and manufacture before commissioning for alteration and repair.
Subsequently, such pressure equipment must be examined periodically with the appropriate intervals to assess whether the safety and health factors of the application can be justified.
As a starting point, the manufacturer or the owner/user must take care to ensure or supervise that the requirements are met. Depending on the classification of the equipment as regards dangerousness (type, pressure, temperature, volume/nominal diameter, content and thus contained energy), the control may also require involvement of an independent third party body.
Who can supervise that your pressure equipment is safe?
As an independent third party certification and notified body, FORCE Certification A/S
may assist you in assessing whether your pressure equipment can be justified as to safety and health, as well as in ensuring that requirements and rules for design/installation and use are met.
Our professionally extensively composed staff holds many years of experience with control and supervision (inspection) of all types of pressure equipment based on the current requirements and rules.
FORCE Certification A/S is an accredited inspection body, type A according to DS/EN ISO 17020, cf. DANAK Reg. Nr. 9057.
Based on this accreditation, FORCE Certification A/S has been appointed notified body identification number 0200 (PED, SPVD and TPED) by the Danish Working Environment Service.
FORCE Certification A/S carries out tasks such as:
- Approval body for design/installation, alteration and repair tasks
- Inspection body at installation control, periodic examinations, operational capability and lifetime examinations as well as conformity assessment of the requirements for operation of steam boilers without constant monitoring
- Conformity assessments.
FORCE Certification A/S has appointed a number of responsible co-ordinators for specific types of pressure equipment
, who will always assist you with replies to concrete questions and ensure that your pressure equipment meets the requirements.
Background for legislation on pressure equipment
The development of pressure equipment followed in the aftermath of the nineteenth century’s fast growing industrialisation. The need for steam for production of mechanical power and motion formed the basis of the development of steam boilers for supply of energy for steam engines.
As the need for steam at that time often exceeded the capacity to produce and attend to the steam boilers and steam engines in a responsible manner, serious accidents and boiler explosions could not be avoided, resulting in a great number of deaths and great material damage and entailed costs.
To prevent the many accidents and boiler explosions, the need for specific rules for manufacture and application of steam boilers and steam engines was quickly recognised, so that the public and users could have the necessary confidence in the equipment and were not exposed to unnecessary danger. These early rules also imposed legal obligations on owner and user – in other words, you could be legally punished if you did not abide by the rules.
Previous rules in Denmark:
- 1832: Steam engines must be examined by specialists
- 1851: Act on examination of steam (boilers, engines, ships)
- 1875: The Danish Working Environment Service initiates control of steam boilers and control of accidents
- 1896: Act on boiler attendants.