Well integrity management
Increase safety and reduce the risk of downtime through strategic well integrity management. We hold extensive experience within structural design and collecting and evaluating data concerning well integrity management.
Through a combination of structural monitoring, corrosion management and fatigue assessments, we can improve well integrity decision making, leading to more control and thereby safer well operation.
We operate within the following:
- Structural integrity
- Structural monitoring
- Corrosion management
- Inspection (NDT)
We provide services from early well design, through drilling and work over operations to production, supporting the life cycle of the wells.
Well structural integrity
Our structural well integrity services span from design analysis (modelling, simulation and capacity assessment) to structural monitoring with subsequent post-processing of measured data. The services are connected to risers, Xmas trees, wellheads, conductors and casings (down to ~30m below mudline).
Design, verification and re-assessment
Drilling and production systems are often built up of standard components from various suppliers. During the whole system design phase or as a final verification, global nonlinear simulation models are created in order to analyse the system response and to assess the individual components structural capacity.
Re-assessment of system may be required if operational conditions, parameters and/or properties applied in the design phase are changed when the system is installed and put into production.
The deliveries from the work includes structural capacity utilisation for the individual components as well as optionally recommendations for structural improvements (improved structural robustness/reduced utilisation).
Monitoring systems are made up from a set of sensors, typically accelerometers, inclinometers, strain gauges and displacement sensors, with wired or wireless communication to a computer on the rig for storage, control, processing and visualisation.
Monitoring equipment is applied in cases where:
- The design capacities are limited
- The system or component response is difficult to predict by simulations
- The measurements are, directly or indirectly, used to set operational parameters
- There is a need to monitor fatigue damage due to limited service life
Data and information may also be made available onshore or at other locations on the vessel, and it is essential that sampling of all sensors at sufficient frequencies to reproduce the loads is synchronous.
The monitored responses are either delivered to the client as-is (filtered and quality assured) or they are post-processed where derived quantities are supplied to the client.
Post-processing of monitored response
The post-processing activities transforms core monitored responses data to high level information directly applicable in decision making processes by using actual structural behaviour rather than responses predicted from simulation tools.
Corrosion management for wells
FORCE Technology Norway has developed corrosion models over time and is responsible for well corrosion management on several oil fields in the North Sea.
In order to collect, treat, visualise and distribute important corrosion information, we developed CMIS-wells (Corrosion Management Information System for wells), which is a web-based data management system designed to share inspection results, laboratory analysis, monitoring results and corrosion data with all relevant personnel. It provides an efficient flow of information.
CMIS-wells includes functionalities such as:
- E-mail notification whenever a report has been uploaded, or if an action has been assigned
- System status as traffic light colours for easy status review and interpretation
- Corrosion forecasts to support remedial actions (e.g. inspection/monitoring adjustments)
Well integrity management consists of many aspects that need to be catered to in a proper manner. We have an extensive knowledge and understanding of how components work and degrade, and combined with our expertise within structural integrity and structural monitoring, we are capable of fully understanding and predicting the way your asset will perform under any given circumstances.
Inspection (NDT) for wells
We provide a variety of subsea inspection tools, customised to your needs.
Consultancy and expertise
We provide consultation throughout the entire process. Our vast experience within integrity management allows us to make more qualified decisions and evaluations. We have the practical and theoretical skills to find and deliver the approach that is right for you.
Do not hesitate to contact us if you would like to receive more information, or if you have any questions or inquiries.