Electromagnetic Compatibility (EMC) testing facilities with semi-anechoic chambers and full-anechoic rooms. Designed for various electronic products, ensuring precise emission and immunity requirements testing.

Advanced EMC testing facilities for testing any electronic product

Our EMC testing facilities ensure that electronic products operate seamlessly without interference. Using our advanced facilities and drawing on our substantial expertise in accredited EMC testing, we test a wide range of products, from small gadgets to large machinery. This ensures that manufacturers comply with compatibility standards.

Comprehensive compliance: EMC testing facilities aligned with international standards

The EMC testing facilities adhere to a comprehensive range of international standards, ensuring accurate and reliable testing. Covered standards include

  • CISPR 11
  • CISPR 22
  • CISPR 25
  • CISPR 32
  • EN/IEC
  • 61000-4-2
  • EN/IEC 61000-4-3
  • EN/IEC 61000-4-4
  • EN/IEC 61000-4-5
  • EN/IEC 61000-4-6
  • EN/IEC 61000-4-8
  • EN/IEC 61000-4-9
  • EN/IEC 61000-4-10

as well as product standards like

  • EN60945
  • EN/IEC 60601-1-2.

These standards cover emissions and immunity testing across various frequency bands, ensuring electromagnetic compatibility in electronic devices. Our facilities are equipped to conduct testing following these standards, ensuring compliance and confidence in the validity of test results.

EMC test facilities' specifications

EMISSION 

  • Type  
    • Semi-anechoic (SAC) chambers (Walls and ceilings covered with absorbers, and the floor is reflective) The floor can be covered with movable absorbers.
    • Full-anechoic chambers (FAC) (Fully covered with absorbers)
  • Frequency range (radiated and conducted emission)
    • 9 kHz - 40 GHz  
  • Dimensions (LxWxH)
    • 20.1 x 13.0 x 8.8 m  
  • Port dimension (WxH)
    • 3 x 3 m door dimension (WxH): 1.2 x 2.1 m  
  • Measuring Distances (emissions)
    • 1 m, 3 m and 10 m
  • Load capacity (floor):
    • Max. 10.000 kg/m2
  • Rotating platform 
    • Dimensions (diameter): 5 m  
    • Load: max. 10.000 kg (distributed)

 IMMUNITY

  • HF radiation
    • Frequency range: 26 MHz - 40 GHz  
    • Field strength: max. 1000 V/m (depending on the frequency range and the test method)  
  • ESD test
    • Test level: ± 30 KV 
  • Fast transient/burst
    • Test level: ± 4.8 KV (3 phase)
  • Surge
    • Test level: ± 10 KV  (3 phase)
  • Conducted immunity
    • Frequency range: 9 kHz - 230 MHz. 
    • Level: max. 30 V/rms or 260 mA  
  • Magnetic field
    • 50/60 Hz, 1000 A/m
  • General conditions
    • Power supply options: 230 VAC / 50 Hz (phase+0), 400 VAC / 50 Hz (3 phases+0) max 125 A, 60kW, 0-1kHz(AC), 690volt (3-Phase AC), 1100V (DC)
    • Signal Connections: Ethernet, VGA, DVI, D-sub, USB, HDMI, CAN, RS232, VDC, VAC etc.  
    • Other: Air, water 
Empty anechoic chamber
The 20.1 x 13.0 x 8.8 m EMC chamber is used for measuring electrical noise and harmonics from electronic equipment under in a shielded and controlled conditions following international test standards.