News

NADCAP accrediation

This is a significant accomplishment which compliments FORCE Technology’s national accreditation schemes.

Our thermal vacuum testing facility has been revitalized

The new vacuum test facilities have renewed focus on testing of equipment for the space industry.

FORCE Technology encourages women in technology

FORCE Technology supports and encourages women in technology and through participation in two organizations, is helping to create a more inclusive environment, and more opportunities for women in technology.

MEGA loop is entering the building phase

The MEGA loop for high-pressure calibration of gas meters is set to open for calibrations in the early 2021.

New Vice President of FORCE Technology

On 1 September 2019, Thomas Ohm became FORCE Technology’s Vice President of Product Compliance. Product Compliance mainly serves the Scandinavian electronics and equipment industry with testing, consultancy and product approvals and originates from the merger with DELTA in 2016.

Autonomous robot 3d scans wind turbine blades

FORCE Technology, Siemens Gamesa Renewable Energy and DTU have cooperated in developing an autonomous robot that can scan the surface of wind turbine blades before leaving the factory. The development of the robot has taken place in a publicly funded MADE-project.

New MEGA loop for high-pressure calibration of natural gas meters

The MEGA loop will ensure calibration of meter sizes up to 56” with two meters in series, at a flow of up to 85.000 m³/h and a pressure of 65 bar. The investment will create a one-stop shop facility for gas flow calibration for all meter sizes in both the upstream and downstream sector.

SimFlex accredited by DNV GL – again

The accreditation is valid for 5 years and as one of many benefits, FORCE Technology will now be able to help training providers prove STCW compliance to their national maritime administration.

How can air quality be mapped?

Air pollution can cause great concern. FORCE Technology can help map the air quality and assess whether the requirements are met and possibly suggest initiatives to improve air quality.

FORCE Technology sells Swedish subsidiary

FORCE Technology has signed an agreement to sell its subsidiary FORCE Technology Sweden AB to Kiwa Inspecta AB. The divestment has no bearing on the Danish and Norwegian inspection and testing activities, where FORCE Technology maintains its strong position.

Standards for green energy technology with a Danish mark within the framework of NACE

It is important for the Danish industry to get a Danish mark on the international standards for green energy technology. FORCE Technology contributes with the latest know-how on materials intended for use in harsh environments

Digital twins – a step on the road to making shipping more green

Study of performance data and machine learning is going to improve training of captains.

New maritime simulator centre opened in Singapore

On March 13, FORCE Technology Maritime Ship Simulator (FTMSS) centre located at PSA Marine (PSAM) in Singapore officially opened.

New visual theatre in our part task bridge

The visual view in our part task bridge simulator has been upgraded with LED screens to improve the quality and user experience. In addition, the bridge can now be used as a multi-bridge with a wider range of ship types.

Maritime innovation for 12 million DKK

We have been granted 12.1 million DKK for three innovative maritime projects. The outcome of the innovation projects will benefit a broad range of companies working in the offshore and maritime sectors.

Materials Award from FORCE Technologys Materials Foundation

This year, the Materials Award from FORCE Technology’s Materials Foundation was received by Adam Rubin, R&D Manager, Materials Technology with National Oilwell Varco.

Descriptions of 100 Danish testing facilities

A database called Denmark's Technological Infrastructure has just been launched. It contains more than 100 descriptions of technological infrastructure built at the Danish Research and Technology Institutes. This makes it easier to discover the testing and demonstration facilities made available by these institutes for Danish businesses.

FORCE Technology Roadshow 2016 dk

New Head of Product Compliance in Aarhus

As of 1 November 2018, Allan Grønkær Kristensen has assumed his role as head of our testing department in Aarhus, performing product tests and approval. His leadership and professional skills in the fields of electronics, acoustics, and EMC strengthen the business, benefiting our customers and colleagues alike.

New tools for smart regulation of wind turbine noise

Innovation Fund Denmark will invest DKK 13 mio in the project DecoWind, which focuses on smart regulation of noise from wind turbines. FORCE Technology is a partner in the project along with DTU Wind Energy, Siemens-Gamesa Renewable Energy, and EMD International.

Cruise vessel in ice-infested waters

Navigating a cruise vessel in arctic waters requires special skills in order to avoid dangerous situations. This is a central element of the new Polar Code courses, which one of our instructors experienced first-hand on his recent cruise trip to Greenland.

New DanPilot simulator

DanPilot's new ship simulator will be used for their pilot training, to enhance the skills of the pilots and help increase safety in Danish waters.

Next step in the cost reduction in the wind industry

Mobile inspection robots and automated evaluation of inspection data will play a major part in reducing costs for subcontractors, contractors, producers and owners in the wind industry.

Team Danmark runs test in our wind tunnel

The Danish national cycling team train hard in their preparations for the 2020 Olympics. To improve their chances of taking home an Olympic medal, they’re also testing the aerodynamics of the riders’ equipment.

Design is tested with psycho-physiological equipment

The Behaviour Psychology Field Lab represents a different approach to how we study user behaviour, combining well-known ethnographic methods with the latest technology within psychophysiological measurements.

MX3D printed bridge wins prestigious prize

The Dutch Technology Startup MX3D has won the prestigious STARTS prize for their 3D printed stainless steel bridge awarded by the European Commission.

WTO seminar: Next Generation Inspection Methods

18 international wind turbine owner companies were gathered at an exclusive blade event Next Generation Inspection Methods Seminar June 5th hosted by FORCE Technology. 

Denmark is the centre of reliability in 2018

Denmark was well-known within the field of product reliability in the 1980s with professor Jørgen Møltoft’s research in the centre; now Denmark is winning back this reputation.

New features in SimFlex Analyzer tool

The SimFlex Analyser tool is used for comparing and analysing ship simulations to determine the vessel’s exact track and performance. 

Reorganisation in the SimFlex support and production team

In order to strengthen our customer support and service and we have re-organised the SimFlex support and production team.

The broadest measuring range within vacuum calibration in Denmark

Vacuum calibration from high vacuum and to atmospheric pressure makes the laboratory at FORCE Technology unique in Denmark. This is especially beneficial to the Danish industry, as both knowledge and resources are retained in Denmark.

FORCE Technology is a silver sponsor at the EFMWS 2018

As a worldwide provider of accredited flow calibration services within gas, oil, water, air, heating and liquids other than water, FORCE Technology,is showcasing a strong international profile at the EFMWS in April.

The Ariane 6 rocket has passed an important milestone

The rocket engine for Ariane 6 has been tested with success. FORCE Technology contributes with key technology.

Enhance your knowledge within advanced ultrasonic testing and strengthen your competitive advantages

Our newest range of courses in advanced ultrasonic testing ensures that you can fulfill the industries requirements to a modern and qualified NDT inspector.

Accredited air calibration is a reality in 2018

With the purchase of the world’s largest air calibration facility, FORCE Technology is extending the range of accredited flow calibration services from the end of January 2018.

The Turkish minister in the wind tunnel

On Thursday 14th of December, the Turkish Minister for Transport, Maritime Affairs and Communication visited our wind tunnel facilities in Lyngby, Denmark. 

Wind pressure measurements reach new levels

With our dynamic pressure measurement system, we offer even faster and more flexible wind pressure measurements. 

New ship building collaboration between China and Denmark

7 November 2017 the Danish and Chinese maritime industries signed a new collaboration agreement focusing on green technologies and maritime safety.

New Nordic IoT centre helps businesses release the IoT potential

FORCE Technology and the Alexandra Institute, have teamed up to form the Nordic IoT Centre, thereby offering the industry a much sought-after one-stop shop for the development and practical implementation of IoT solutions. 

Model test reveals propellers’ influence on ship performance

With model tests, the propeller’s light running margin (LRM) can be objectively evaluated, and the propeller pitch can be modified if needed.

DuPont safety award 2017

British Columbia Ferry Services Inc and BC Ferry & Marine Workers’ Union win DuPont’s 2017 Safety and Sustainability Award and celebrate 10-year’s anniversary for the SailSafe program. FORCE Technology has assisted BC Ferries in starting up and implementing the SailSafe program leading to the award.

ECNDT 2018

12th ECNDT conference on non-destructive testing is held in Gothenburg, Sweden, June 11-15, 2018.

Cruising in Hamburg Seatrade 2017

Over 5000 visited the 2017 cruise and river cruise convention Seatrade Europe held in Hamburg, which had more than 260 exhibitors from 40 countries. 

Human factors experts ensure safer e-navigation

New e-navigation solutions presently being developed in the EfficienSea2 project aim at making ships more efficient and are further improved by human factors expertise.

A breath of fresh air!

FORCE Technology is opening up for business within the area of Metrology & Air Environment in Norway.

Investigating wind effects of Thu Thiem 2 Bridge

Thu Thiem 2 Bridge in Vietnam has an unusual design – both above and below the water surface –  which needed to be aerodynamically verified before construction.

Simulator training ensures safer navigation of cruise ships in arctic waters

Cruise ships can be challenging to manoeuver, but in arctic waters there are many additional dangers to take into account to ensure passenger safety.

New management at FORCE Technology Sweden

The new management will strengthen FORCE Technology’s position in the Swedish market and create the best technical inspection company in Sweden.

New Icelandic ferry defies harsh weather conditions

Coming all the way from the South Atlantic Ocean, the large swell smashes against the sheer coast of Iceland. Under these conditions, the new ferry must sail between Vestmannaeyjar islands and Landeyjarhöfn.

The biggest force calibration machine in Denmark is moving in

A new force calibration machine provides Danish corporations access to a wide service palette for calibration of measuring equipment. The machine is the only one of its kind in Denmark and it’s taking possession has been quite unique.

A significant space visit from the European Space Agency

The Director General of ESA, Jan Woerner, has been on a one-day visit to Denmark. As the only Danish space company, FORCE Technology hosted a company visit.

Our ship model decorates the front of Danish Maritime’s house

One of our ship models now decorates the square in front of Danish Maritime’s house at Symfonivej 18 in Herlev.

New Singapore office

On the 4th of April 2017, we opened our brand-new simulation center in Singapore. 

New VTS station enhances the realism of our courses

We recently opened the doors to our new VTS training station, adding to the realism of our VTS courses.

Drones on new missions

The Danish Agency for Science & Higher Education has granted FORCE Technology funds to launch new drone activities. The two-year project will develop new drone-based solutions within environmental measurements and contact-based inspection. 

Students learn basic knowledge of model tests in our facilities

We help introduce future naval architects to model tests as a scientific method for performing analysis and solving problems.

Large scale climatic testing now available at Lindø

A large climate chamber for full-scale testing has officially been added to the infrastructure at Lindø Component and Structure Testing A/S, LCST.

Danish companies will grow into space

FORCE Technology and the Alexandra Institute are collaborating in a new space project, the aim of which is to increase the visibility of Danish companies and strengthen their potential for expanding their businesses in space.

FORCE Technology wins global corrosion award

FORCE Technology has been awarded the 2017 MP Corrosion Innovation of the Year Award for its new and innovative sensor, FiGS®. The award was presented during CORROSION 2017 in New Orleans, Louisiana.

Our still water tank tests receive ISO 9001:2015 certification

With the accreditation in quality management our service and management is in correspondence with the international standards, customers requirements and governmental authorities.

Ship Acoustics - consultancy regarding noise and vibration on ships

We now offer consultancy regarding noise and vibration on ships. This is especially beneficial in new building projects where we can help naval architects, shipyards and shipowners reduce structure-borne noise in their vessels.

FORCE Technology strengthens focus on the gas meter re-calibration market

The team behind the world’s largest closed loop for high-pressure calibration of natural gas meters is entering the world-wide re-calibration market. For this strategic investment, FORCE Technology teams up with an experienced sales team in order to strengthen focus on this segment.

Try our ship simulator at the new Experimentarium!

The new Experimentarium opened on January 26th, 2017 welcoming children and adults to play in their 16 interactive universes, where ’The Port’ with our ship simulator is one of them.

Opening the market for vessel performance monitoring and optimisation

In the field of vessel performance monitoring each service provider uses their own data collection programme, which is often incompatible with the ship owner’s system. We are developing a standard to avoid this problem.

Climatic wind tunnel testing of cables

The cold weather and ice we are experiencing these days has been known to cause damages on cars and people when crossing icy bridges. These accidents can be prevented by performing wind tunnel tests.  

Accurate inspection of buried pipelines - without excavation

Discover how new technology allows you to predict remaining service life, and accurately evaluate the condition of subsea pipelines - buried, rocked dumped or exposed.

The expansion of Denmark’s second largest cruise port

Expanding Port of Roenne by enlarging the manoeuvring basin and building new multipurpose quays will draw more tourists to the sunny island and consequently secure the future of the port.

Instant awareness of your fuel consumption

A market with too many ships and not enough cargo has placed the shipping rates under pressure. Despite the currently low fuel prices, fuel is still a huge expense for a ship owner.

Maritime News 2016/17 has been published

Our annual magazine Maritime News has just been published. The magazine contains the past year’s most noticeable cases and research & development projects.

A successful wind tunnel workshop

For the third time, we had the pleasure of hosting a workshop for architects where they learn about how our wind tunnel services can contribute to their design process.

First fatigue test in mechanical test bench

Inauguration of the mechanical test bench at Lindø Component and Structure Testing A/S with fatigue testing an offshore foundation node is part of a joint industry research project. 

IMO agrees to a global sulphur cap of 0.50 % in fuel oil for ships

By 1 January 2020 all ships must use fuel oil complying with the global sulphur cap.

FORCE Technology wins Asset Integrity Management contract with BP Norway

Model test launch of the Starfish AHTS vessels

Model tests in our towing tank ensured a safe launch of the most complex AHTS vessels ever launched at Kleven Verft shipyard.

A unique combination of methods results in user-friendly products

The Department for Applied Psychology are amongst the first to combine psychological expertise with the newest measuring equipment. Furthermore, they will conduct their tests as field studies.

A new collaboration makes performance optimisation easier for ship-owners

The new collaboration between software supplier Logimatic and research and development company FORCE Technology has resulted in a multifunctional software system capable of providing big results for the industry.

FORCE Technology featured in Discovery Channel series

The series ‘World’s biggest shipbuilders’ follows the development of three big projects at the Maersk group – some of which were tested in our facilities. 

New features to our vessel performance monitoring tool

Low oil prices, low freight rates and reduced world trade have led to an enhanced focus on fuel efficiency and thereby an increased need for performance monitoring in the maritime industry. 

Simflex 4.9 simulator software package will be released this autumn

The new Simflex software package will include new functionalities as well as many improvements to help users work efficiently when planning and carrying out scenarios.

DHI and FORCE Technology expand their collaboration

DHI and FORCE Technology have collaborated with great success throughout many years. Now they have chosen to expand their cooperation by offering combined courses- to benefit the maritime Denmark

Black offshore going green

Despite the low oil prices, we still have numerous ways to help companies in the energy sector. These will be discussed at the Offshore Technology Conference in Houston, Texas from May 2-5 2016.

DELTA and FORCE Technology merges

With the merger, DELTA and FORCE Technology create one of Denmark and Scandinavia’s biggest GTS technology service companies. With approximately 1600 employees and over 1.5 billion DKK in turnover, the goal is to be the favorite Nordic impartial service- and knowledge partner within selected technology sectors. Ernst Tiedemann becomes the new Chairman of the Board.

Annual report 2015

We are proud of 2015. 

New jack-up facility from FORCE Technology reduces the risk of accidents

We will demonstrate our new jack-up facility at Asia Pacific Maritime 2016

New subsidiary in the Middle East

On February 25th FORCE Technology officially established FORCE Technology Middle East LLC based in Abu Dhabi. 

Cargill invests in SonoSteam technology for poultry

Major poultry supplyer, Cargill, invests in SonoSteam technology for cutting campylobacter.

Seminar om 3D print i den maritime industri

Meet us at EWEA 2015 Annual Event in Paris

From 17-20 November, we participate in the EWEA 2015 Annual Event. Watch live demonstrations of some of our advanced NDT equipment and services, developed to protect your assets.

Latest news from our Maritime Division

The latest version of Maritime News has been published. It provides an updated overview of the latest development of services and products across the maritime division. 

SonoSteam in European innovation competition

The winners of this year’s EARTO Innovation Award were revealed on 14 October. The SonoSteam technology from FORCE Technology is highlighted in the brochure covering all competition entries.

Port studies for Port of Vordingborg

We have carried out port studies for  Vordingborg Port to expand the port to prepare it for larger ships than currently calling the port. 

Planar Motion Mechanism with CFD

Over the years, FORCE Technology has performed captive model tests for shipowners to assess the manoeuvring capabilities of ships in the late design stage.

Carousel tug

Our ship model database has been extended with a carousel tug.

Meet the Industry’s Composite Laboratory at ICCM20

The Industry’s Composite Laboratory is among the exhibitors when the 20^th annual International Conference on Composite Materials, ICCM20, takes place in Copenhagen the 20-24 July 2015.

High-pressure calibration

High-pressure calibration of gas meters reaches new heights at FORCE Technology

3rd international Metrology for LNG Workshop

The 3rd International "Metrology for LNG" Workshop will take place at FORCE Technology in Brøndby, Denmark on the 19th May 2015.

Grand opening of the world’s largest closed loop

The world’s largest closed loop for high-pressure calibration of natural gas meters is opening its doors to customers, partners and the worldwide audience. 

Signature opens a passage for clean air over China

Three Danish ministers witnessed the signing of a strategically important commercial contract between FORCE Technology and Tongfang Environment CO., Ltd.

Meet us at the International North Sea Flow Measurement Workshop

The 32nd International North Sea Flow Measurement will take place on the 21 - 24 October 2014 at the St. Andrews Hotel in Scotland, UK.