Remotely control your MIC Smoke Measuring Instrument Type EC-912 with our Intelligent MIC Control Unit for efficiency and convenience.
Enable remote control of calibration and operation for smoother operations
MIC EC-912 is an advanced smoke-measuring instrument capable of accurate measurements. Adding our Intelligent MIC Control Unit EC 912-25 enables remote calibration and operation control via Ethernet or USB, enhancing efficiency and convenience.
Control the following functions with a MIC Control Unit EC 912-25
Command to adjust the chamber voltage (Uc)
Command to automatically calibrate the MIC instrument (Zero- and full-scale calibration) before starting the smoke ramp
Command to read the chamber voltage (Ux)
The IMCU is a plug-in replacement for the original AMCU Controller type EC-912-20. It provides the same external interfaces and offers remote control of calibration and operation using an Ethernet or USB connection. The system is completely controllable through an XML-RPC protocol or partly by a Web interface, both over a network connection.
Reach out for your purchase
Get in touch to purchase a MIC Control Unit EC 912-25.
The MIC smoke measuring system type EC-912 consists of the following parts:
MIC smoke measuring head
Multi-cable, 10 m (other lengths on request)
MIC control unit with power supply
Flow control unit with filter
Vacuum pump
Accessories, instruction manual, etc.
The smoke measuring head is installed at the measuring site and connected to the control unit via the multi-cable. The control unit, flow control unit and power supply are housed in a cabinet, which can be placed in an operator room. The vacuum pump can be placed in a convenient location.
